Sitemap
 
 

 

  

 
  Country Pages > China Presentations

Activities Presentations / Papers
Regional Workshop for Research and Academic Institutions on: ¡®Establishing a Cooperation Mechanism for Human Resource Development on Sustainable Agricultural Mechanization¡¯, 13-15 April 2017, Nanjing, China Ms. Zhang Huijie, Deputy Director General, Department of International Cooperation, Chinese Academy of Agricultural Sciences (CAAS), Beijing
Ms. Zhang Shuang, Project Officer, Department of International Cooperation
Chinese Academy of Agricultural Sciences (CAAS), Beijing
Mr. Chen Qiaomin, Director/Researcher, Nanjing Research Institute for Agricultural Mechanization, Chinese Academy of Agricultural Sciences, Nanjing
Mr. Cao Guangqiao, Deputy Director/Researcher, Nanjing Research Institute for Agricultural Mechanization, Chinese Academy of Agricultural Sciences, Nanjing
Mr. Zhang Anping, Programme officer/ Senior Engineer, Nanjing Research Institute for Agricultural Mechanization, Chinese Academy of Agricultural Sciences, Nanjing
Mr. Wang Shuo, Programme officer/Research assistant, Nanjing Research Institute for Agricultural Mechanization, Chinese Academy of Agricultural Sciences, Nanjing
Ms. Yu Wenyi, Programme officer/ Research tester, Nanjing Research Institute for Agricultural Mechanization, Chinese Academy of Agricultural Sciences, Nanjing
Ms. Han Lujia, Professor/Dean, College of Engineering, China Agricultural University
Panel Discussion on Sustainable Agricultural Mechanization of CSAM, 17 March 2017, Bangkok, Thailand Ms. Li Qian, Programme Officer, Department of International Cooperation, Ministry of Agriculture, People¡¯s Republic of China
Ms. Liu Jun, Programme Officer, Department of Agricultural Mechanization, Ministry of Agriculture, People¡¯s Republic of China
Ms. Yang Minli, Director, China Research Center for Agricultural Mechanization Development, Professor, China Agricultural University, Beijing
Ms. Lu Hanning, Program Officer, Center of International Cooperation Service, Ministry of Agriculture, People¡¯s Republic of China
Ms. Chen Xingying, China Agricultural Machinery Distribution Association
Mr. Sun Can, China Agricultural Machinery Distribution Association
Ms. He Dongxian, Professor, China Agricultural University, Beijing
The twelfth session of the Governing Council (GC) of CSAM, 16 March 2017, Bangkok, Thailand
Ms. Li Qian, Programme Officer, Department of International Cooperation, Ministry of Agriculture, People¡¯s Republic of China
Ms. Liu Jun, Programme Officer, Department of Agricultural Mechanization, Ministry of Agriculture, People¡¯s Republic of China
Ms. Yu Miao, Assistant to the Permanent Representative to ESCAP, Permanent Mission of the People¡¯s Republic of China to the ESCAP
Ms. Minli Yang, Director, China Research Center for Agricultural Mechanization Development; Professor, China Agricultural University, Beijing
3rd Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM), 8-10 December 2016, Negombo, Sri Lanka
Mr. Yao Chunsheng, Deputy Director-General; China Agricultural Machinery Testing Centre, Ministry of Agriculture of China
Mr. Wang Jiazhong, Division Director; Department of Agricultural Mechanization, Ministry of Agriculture of China
Ms. Han Xue, Deputy Division-Director; China Agricultural Machinery Testing Center (CAMTC), Ministry of Agriculture of China
4th Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific, 23-25 November 2016, Bao Son Hotel, Hanoi  
Opening Remark by Ms. Li Yutong, Incoming Head, Centre for Sustainable Agricultural Mechanization, United Nations Economic and Social Commission for Asia and the Pacific

Agricultural Mechanization and Development of Sustainable Agriculture in China
by Mr. WANG Guozhan, Division Director, Department of Agricultural Mechanization, Ministry of Agriculture

A Road to Sustainable Agricultural Mechanization ¨C the Experiences of Conservation Agriculture in China by Prof. Li Hongwen, Head, Conservation Tillage Research Centre, Ministry of Agriculture of China; Professional, China Agricultural University

The Path and Cases on China¡¯s Sustainable Agricultural Mechanization
by  Prof. Yang Minli, Director, China Research Centre for Agricultural Mechanization Development; Professor, China Agricultural University 

Mr. Wang Guozhan, Division Director, Department of Agricultural Mechanization, Ministry of Agriculture
Ms. Li Yutong, Division Director, Department of International Cooperation, Ministry of Agriculture
Ms. Zhang Yuan, Deputy Division Director, Centre of Agricultural Machinery Extension, Ministry of Agriculture
Mr. Li Hongwen, Head, Conservation Tillage Research Centre, Ministry of Agriculture; Professor, China Agricultural University
Ms. Yang Minli, Director, China Research Center for Agricultural Mechanization Development; Professor, China Agricultural University
Ms. Liang Jingjing, Program Officer, Ministry of Agriculture
Ms. Lu Hanning, Program Officer, Ministry of Agriculture
Ms. Chen Xingying, Vice Director, Department of International Cooperation, China Agricultural Machinery Distribution Association
2nd Member Meeting of the Regional Council of Agricultural Machinery Associations in Asia and the Pacific (ReCAMA), 16-18 July 2016, Coimbatore, India
China Agricultural Machinery Distribution Association by Mr. Deng Zhihong, Deputy Secretary General, China Agricultural Machinery Distribution Association

Mr. JI Wenyuan, Deputy Director General, Center of International Cooperation Service, Ministry of Agriculture
Mr. AN Quan, Division Deputy Director, Center of International Cooperation Service, Ministry of Agriculture
Mr. DENG Zhihong, Deputy Secretary-General, China Agricultural Machinery Distribution Association
Mr. MA Zheng, Director of International Development Dept., China Agricultural Machinery Distribution Association
Mr. YANG Lin, Vice Secretary-General, China Agricultural Mechanization Association
Mr. NING Xuegui, Deputy Secretary General, China Association of Agricultural Machinery Manufacturers
Mr. CAO Guangqiao, Deputy Director, Nanjing Research Institute for Agricultural Mechanization

Mr. WAN Zhengmin, Jiangxi Yuangeng Agricultural Machinery Co., Ltd.
Mr. LIU Wenyi, Jiangxi Yuangeng Agricultural Machinery Co., Ltd.
Ms. CHEN Hui, Jiangxi Yuangeng Agricultural Machinery Co., Ltd.
Mr. WANG Jinbao, Jiangxi Yuangeng Agricultural Machinery Co., Ltd.
Mr. CAO Weifu, Nantong Zhuoyue Accurate Fittings Co., Ltd.
Mr. CHENG Shiqiang, Nantong Zhuoyue Accurate Fittings Co., Ltd.
Mr. BEN Zhiping, ChangZhou Mateng Machinery Co., Ltd.
Mr. ZHOU Bingxi, Tianjin City Chau Letter Technology Co., Ltd.
Mr. CHEN Zhenghua, Zhejiang Haitian Machinery Co., Ltd.
Mr. RONG Jun, Jiangsu Dan Handsome Vehide Accessories Co., Ltd.
Asian and Pacific Workshop on Whole-Process Mechanization of Potato Production, 27-28 June 2016, Kunming, China
Speed up promotion of China Potato Production Full Mechanization by Mr. Li Anning
 Discussion on key technologies of potato machinery harvesting by Mr. Shang Shuqi
Experimental Study on Potato Harvester with Integrated Type of Vibrated Digging and Separating by Mr. Song Jiannong

Mr. Li Anning, Vice-Director, Center of Agriculture Machinery Extension of Ministry of
Agriculture of the People¡¯s Republic of China
Mr. Yu Kongyan, Deputy Director, Agricultural Trade Promotion Centre, Ministry of
Agriculture of the People¡¯s Republic of China
Ms. Zhao Xuejin, Project Officer, Liaison & Cooperation Division, Agricultural Trade
Promotion Centre, Ministry of Agriculture of the People¡¯s Republic of China
Mr. Lu Xiaoping, Regional Director, Asia-Pacific Centre of the International Potato Centre
lMs. Wu Min, Vice Secretary General, Agricultural Mechanization Chapter, Chinese Society for Agricultural Machinery
Mr. Liu Zhuo, Vice Secretary General, Agricultural Mechanization Chapter, Chinese Society for Agricultural Machinery
Mr. Song Jiannong, Professor, College of Engineering, China Agricultural University
Mr. Shang Shuqi, Head of College, College of Electromechanical Engineering, Qingdao
Agricultural University
Mr. Sun Can, Head, International Cooperation Department, China Agricultural Machinery
Distribution Association
Mr. Yuan Tongbao, Vice Director, Information and Inquiry Department, Secretary of Tillage
Machinery Branch, China Agricultural Machinery Distribution Association
2nd Meeting of the Technical Working Groups (TWGs) of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM), 10-13 May 2016, Bangkok, Thailand  
Ms. Zhao Xiaoping, Division Director, Agricultural Machinery Testing Centre
(CAMTC), Ministry of Agriculture of China
Mr. Zhang Xiaochen, Vice Director, China Agricultural Machinery Test Center
(CAMTC), 3rd testing division, Ministry of Agriculture of China
Mr. Chang Xiongbo, Deputy Division-Director, China Agricultural Machinery Testing
Centre (CAMTC), Ministry of Agriculture of China
Mr. Liao Hanping, Jiangsu Changfa Agriculture Equipment Co.Ltd
3rd Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific & 11th Session of the Technical Commission & 11th Session of the Governing Council of CSAM, 9-11 December 2015, Manila, the Philippines  
Human Resource Development in Agricultural Mechanization in China  by Mr. Lu Yubin, Deputy Division Director, Department of Agricultural Mechanization, Ministry of Agriculture
Practice and Prospect of Human resource development of Nanjing Research Institute for Agricultural Mechanization (NRIAM) by Mr. Cao Guangqiao, Deputy Director, Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture
Development of International Cooperation in ABE by CHINA ¨C Mr. Ma Teng, Director Assistant, Chinese Academy of Agricultural Mechanization Sciences (CAAMS)
Human Resource Development in the Process of Agriculture Mechanization by Mr. Chang Zhouwei, Overseas Key Account Director, Zoomlion Heavy Machinery

Mr. Zhang Hanfu, Deputy Division Director, Department of Agricultural Mechanization, Ministry of Agriculture
Ms. Liu Yannan, Deputy Director, Center of International Cooperation Service, Ministry of Agriculture
Mr. Zhao Wen, Section Chief, Center of International Cooperation Service, Ministry of Agriculture
Ms. Jin Hong, YTO International LTD., Guangzhou
Mr. Shi Jian, YTO International LTD., Luoyang
Mr. Zhao Shuaiwei, YTO International LTD., Luoyang
Mr. Chen Jiang, Zoomlion Heavy Machinery, Manila
Mr. Ma Michael,  Zoomlion Heavy Machinery, Manila
1st Annual Member Meeting of Regional Council of Agricultural Machinery Associations in Asia and the Pacific of CSAM, 26-28 October 2015, Qingdao, China
Mr. Kong Liang, Deputy Director General, Department of Agricultural Mechanization, Ministry of Agriculture
Ms. Feng Xin, Assistant to the Permanent Representative, Permanent Mission of People¡¯s Republic of China to the UNESCAP, Embassy of P. R. China to the Kingdom of Thailand
Mr. Mao Hong, Chairman, China Agricultural Machinery Distribution Association
Mr. Chen Tao, Vice-Chairman, China Agricultural Machinery Distribution Association,
Mr. Deng Zhihong, Vice-Chairman, China Agricultural Machinery Distribution Association; Secretary of CPC Committee, Director-General, China Agricultural Machinery Testing Centre
Mr. Yang Lin, Vice Secretary-General, China Agricultural Mechanization Association,
Mr. Fan Jinglong, Vice-President, China Association of Agricultural Machinery Manufacturers
Training and Study Tour for Agricultural Machinery Distributors in Asia and the Pacific, 27 July-4 August 2015, Beijing, China

China Agricultural Machinery Testing Centre(CAMTC)
Testing & Appraisal of Agricultural Machinery in China
Build Strategic Alliances Platform, Share New Achievements by Mr. MA Xianjun, General manager of foreign affairs, GIFORE, China
Current Status and Development Trends of China's Agricultural Machinery Industry by FOTON LOVOL
Enlightenment of Chinese Agricultural Mechanization Development to Southeast Asia by ZOOMLION Heavy Machinery Co., Ltd

1st Technical Working Group (TWG) Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM), 4-6 May 2015, Serpong, Indonesia Mr. Zhang Xiaochen, Vice Director, 3rd test division, China Agricultural Machinery Test Center
Mr. Chang Xiongbo, Deputy Director of Tractor Test Division, China Agricultural Machinery Testing Centre

The Tenth Session of the Governing Council of CSAM, 16 December 2014, Bangkok, Thailand
Mr. Zhao Lijun, Deputy Director, Department of International Cooperation, Ministry of
Agriculture
Dr. Yang Minli, Executive Deputy Director, China Research Center for Agricultural
Mechanization Development, Professor, College of Engineering, China Agricultural
University
The Tenth Session of the Technical Committee (TC) of CSAM & Regional Workshop on Establishing a Regional Database of Agricultural Mechanization in Asia and the Pacific, Siem Reap, Cambodia, 17-19 November 2014 Keynote Speech  ¨C The New Generation ICT to serve Regional Agricultural Mechanization Development by Prof. Wang Maohua, China Agricultural University, Member of Chinese Academy of Sciences, China
 Country Presentation Paper by Mr. Chang Xiongbo, Vice Director, Tractor Testing Division, China Agricultural Machinery Testing Centre, Ministry of Agriculture
 
Introduction of China Agricultural Machinery Industry and Statistics Works by Mr. Ning Xuegui, Deputy Secretary General, China Association of Agricultural Machinery Manufacturers
The Importance and Procedures on Establishing a Regional Database of Agricultural Mechanization by  Dr. Minli YANG, Professor, Executive Deputy Director, China Research Center for Agricultural Mechanization Development, China Agricultural University, China 
Mr. Hongda Xu, Third Secretary, Department of International Economic Affairs, Ministry of Foreign Affairs, China
Regional Roundtable of National Agricultural Machinery Associations in Asia and the Pacific, 28-30 October 2014, Wuhan, China
Mr. Zhao Lijun, Deputy Director, Department of International Cooperation, Ministry of Agriculture
Mr. Mao Hong, Chairman, China Agricultural Machinery Distribution Association
Mr. Chen Tao, Vice-Chairman, China Agricultural Machinery Distribution Association
Mr. Deng Zhihong, Vice-Chairman, China Agricultural Machinery Distribution Association
Mr. Liu Min, Vice Chairman and Concurrently Secretary-General, China Agricultural Mechanization Association
Mr. Yang Lin, Vice Secretary-General, China Agricultural Mechanization Association
Ms. Han Xue, Deputy Division Director, Division of Technology & Foreign Affairs, China Agricultural Machinery Testing Centre
Mr. Fan Jinglong, Vice-President, China Association of Agricultural Machinery Manufacturers
1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM), 16-19 September 2014, Beijing, China Testing & Appraisal of Agricultural Machinery In China by Mr. LIU Xu
Mr. LIU Min, Director General, China Agricultural Machinery Testing Center, Ministry of Agriculture of China
Mr. LIU Xu, Deputy Director-General, China Agricultural Machinery Testing Center, Ministry of Agriculture of China
Mr. LIU Yunze, Division Director, Department of Agricultural Mechanization, Ministry of Agriculture of China
Mr. ZHAO Lijun, Deputy Director, Department of International Cooperation, Ministry of Agriculture of China
Dr. YANG Minli, Ph.D., Executive Deputy Director, China Research Center for Agricultural Mechanization Development; Professor, College of Engineering, China Agricultural University
2nd Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific, 9-11 September 2014, Serpong, Indonesia  Mr. Li Hong, Permanent Representative of China to ESCAP, Permanent Mission of the People¡¯s Republic of China to the ESCAP, Bangkok, Thailand

The Status and Strategy on China¡¯s Custom Hiring of Agricultural Machinery by Mr. Li Sihua
Beijing Xing Nong Tian Li Agricultural Machinery Service Cooperative by Mr. Chen Ling

Mr. Li Sihua, Division Director, Department of Agricultural Mechanization, Ministry of Agriculture
Ms. Liu Yannan, Deputy Director, Centre of International Cooperation Service, Ministry of Agriculture
Ms. Hu Rong, Programme Officer, Centre of International Cooperation Service, Ministry of Agriculture
Mr. Chen Ling, Chairman, Beijing Xingnong Tianli Agricultural Machinery Cooperative
High-Level Multi-Stakeholder Consultation on Sustainable Agricultural Mechanization in Asia and the Pacific, 26-27 June 2014, Bangkok, Thailand Ms. Lu Yubin, Deputy Division Director, Department of Agricultural Mechanization, Ministry of Agriculture
Mr. Liu Jing, Programme Officer, Department of Agricultural Mechanization Management, Ministry of Agriculture
9th Session of the Governing Council of CSAM, 19 November 2013, Bangkok, Thailand

Ms. Yang Minli, Executive Deputy Director, China Research Center for Agricultural Mechanization Development, Professor, College of Engineering, China Agricultural University, Beijing
Mr. Zhao Lijun, Deputy Director, Department of International Cooperation, Ministry of Agriculture

Mr. Chang Xiongbo, Deputy Director, Tractor Test Division, China Agricultural Machinery Testing Center, Ministry of Agriculture
Ms. Wu Di, Deputy Division Director, Department of Agricultural Mechanization, Ministry of Agriculture

 

Policymakers¡¯ Roundtable on Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM), 18 November 2013, Bangkok, Thailand
Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific, 26-27 October 2013, Qingdao, China
(2,044kb) Presentation on ¡®China¡¯s Agricultural Mechanization Policies¡¯ by Mr. Liu Hengxin, Deputy Director-General of the Department of Agricultural Mechanization, Ministry of Agriculture (MoA)

(217kb) PRC Agricultural Mechanization Saw a Leap-Forward Development by
Mr. Liu Hengxin

Presentation on ¡®China¡¯s Mechanization Industry Development from International Perspective¡¯ by Mr. Chen Zhi, President of China Association of Agricultural Machinery Manufacturers (CAAMM)

(519kb) China Agricultural Machinery Industry: Global Perspective by Dr. Chen Zhi 

Eighth Session of the Governing Council of CSAM, 13 December 2012, Bangkok, Thailand

Mr. Wang Maohua, Professor, China Agricultural University (CAU), Member of Chinese Academy of Engineering
Mr. Ren Hongtao, Director, Division Two, Department of International Cooperation, Chinese Academy of Engineering

4th ANTAM Meeting & 3rd SAMS meeting, 23-24 October 2012, Kandy, Sri Lanka

Mr. Xiongbo Chang, CAMTC
Mr. Li Hongwen, Professor, China Agricultural University

Eighth Session of the Technical Committee of CSAM, 23-25 October 2012, Kandy, Sri Lanka

Mr. Li Hongwen, Professor, Head, Conservation Tillage Research Centre, Ministry of Agriculture,
China Agricultural University
Mr. Xiongbo Chang, Deputy director of Agricultural machinery maintenance division, China Agricultural Machinery Testing Center (CAMTC)

UNAPCAEM and FAO Joint Meeting on Sustainable Agricultural Mechanization in Asia,
Bangkok, Thailand, 17 May 2012
Mr. Xiongbo Chang, Deputy director of Agricultural machinery maintenance division, China Agricultural Machinery Testing Center (CAMTC)
"ANTAM" Technical working Group & Steering Committee Meeting on advancing progress with establishing an Asia-Pacific network for testing agricultural machinery, 15-16 May 2012, Bangkok, Thailand (92kb) Research Report by Mr. Xiongbo Chang, Deputy director of Agricultural machinery maintenance division, China Agricultural Machinery Testing Center (CAMTC)
Launch of UN Economic and Social Survey of Asia and the Pacific 2012, 10 May 2012, Beijing, China Professor HUANG Yanfen, School of Public Administration,
Renmin University of China
Regional Seminar on Rice Production and Mechanization, 12-13 December 2011, Sanya, China

Mr. Yongshou Lv, Ambassador of Ministry of Foreign Affairs of China
Ms. Anping Ye, Director, Department of International Cooperation, Ministry of Agriculture of China
Ms. Bing Liu, Department of International Organizations and Conferences Staff Member, Ministry of Foreign Affairs of China
(802kb) Challenges for Rice Production Technology Transfer and Adoption by Prof. Zou Yingbin
(3,491kb) Mechanization of Rice Production and Challenges in China by Mr. Defeng Zhu, Director of Centre of National Rice Research Institute
(3,224kb) Super Hybrid Rice in China by Mr. Jiming Peng, Professor and Director of Industry Department, China National Hybrid Rice Research and Development Center

Sustainable Agricultural Mechanization Roundtable: Moving Forward on the Sustainable Intensification of Agriculture, 8-9 December 2011 (6,222kb) Agriculture Mechanization Status and Context in China by Prof. LI Hongwen, Head, Conservation Tillage Research Centre, Ministry of Agriculture, China Agricultural University
7th Governing Council meeting of UNAPCAEM, 6 December 2011, Bangkok, Thailand

Prof. WANG Maohua, Professor, China Agricultural University (CAU), Member of Chinese Academy of Engineering

 

Ms. Zhu Yu, Assistant Researcher, Department of International Cooperation, Chinese Academy of Engineering (CAE)

7th Technical Committee of UNAPCAEM, 27-28 October 2011, Bali, Indonesia Mr. Xiongbo Chang, Deputy director of Agricultural machinery maintenance division, China Agricultural Machinery Testing Center (CAMTC)
Launch of the Asia-Pacific Trade and Investment Report (APTIR) 2011 in China, 24 October 2011

Prof. Zhao Zhongxiu, Vice President, University of International Business and Economics (UIBE), Beijing

 

Mr. Yin Xiaopeng, Deputy Director of UW-UIBE Research Centre of International Economics, UIBE

Expert Group Meeting (EGM): Development of a sustainable agricultural machinery and farm implements testing network in the Asia-Pacific region, 26 July 2011, Bangkok, Thailand Mr. Xiongbo Chang, Deputy director of Agricultural machinery maintenance division, China Agricultural Machinery Testing Center (CAMTC)
Launch of the ESCAP Economic and Social Survey of Asia and the Pacific 2011,5 May 2011 Dr. Yu Yongding, Director of the Institute of World Economics and Politics of the Chinese Academy of Social Sciences
The Sixth Session of the Governing Council of UNAPCAEM, 10 February 2011, Bangkok, Thailand

Prof. WANG Maohua, Member of Chinese Academy of Engineering (CAE), Member of International Eurasian Academy of Science (IEAS), President of Chinese Society of Agricultural Engineering (CSAE), China Agricultural University

Ms. Yuqin Han, Programme Officer, General Affairs Office, Bureau of International Cooperation, Chinese Academy of Engineering

6th APCAEM TC Meeting & Strategic Planning Workshop, Putrajaya, Malaysia, 29 November-2 December 2010

Mr. Yinggang Ou, Professor, College of Engineering, South China Agricultural University

Mr. Fu Qin, Professor / Director General , Institute of Agricultural Economics and Development, Chinese Academy of Agricultural Sciences

Mr. Hongwen Li, Professor, China Agricultural University

The Fifth Session of the Governing Council of UNAPCAEM,14-15 December 2009, Bangkok, Thailand WANG Maohua, Member of Chinese Academy of Engineering (CAE), Member of International Eurasian Academy of Science (IEAS), President of Chinese Society of Agricultural Engineering (CSAE), China Agricultural University
5th APCAEM TC Meeting & Expert Group Meeting on Application of Agricultural Machinery for Sustainable Agriculture, the Philippines, 14-16 October 2009

Agricultural Mechanization Development in China by Prof. Huanwen GAO, Conservation Agriculture Expert, China Agriculture University

4th APCAEM GC/TC Meeting, Chiang Rai, Thailand,10-12 February 2009

(7,174kb) The Strategic Approach to the Improvement of Agricultural Productivity towards Food Security in China by WANG Maohua

Regional Forum on Bioenergy Sector Development: Challenges, Opportunities, and the Way Forward, 23-25 January 2008,Bangkok, Thailand

Development Status and Trends of Agricultural Biomass Energy in China
by Haibo Meng, Lixin Zhao, Yishui Tian, Chinese Academy of Agricultural Engineering (CAAE), China

Bioenergy for Sustainable Rural Development in China: Cost-Benefits and Policies
by Dr. Gan LIN

3rd APCAEM GC/TC Meeting,2007, China Engineering Technologies for Sustainable Agriculture and Rural Development in China by WANG Maohua

International Seminar on Enhancing the Extension of Conservation Agriculture Techniques in Asia and the Pacific, Zhengzhou, Henan, China, 24-26 October 2007

List of Presentations (English, Chinese)

List of Chinese Participants

International Seminar on Restructuring and Strengthening Research and Development (R&D) for Agricultural Engineering,27-28 April 2007, Beijing,China

(1,871kb) Restructuring R&D of agricultural engineering in China by WANG Maohua


Experience of Agricultural Engineering development in China by Prof. ZHU Ming, President,Chinese Academy of Agricultural Engineering

(1,659kb) Impact of China¡¯s science and technology system reform on rural development and poverty reduction by Dr. LUO Hui, Division Director, Strategy Survey and Research Office, Ministry of Science and Technology

2nd APCAEM GC/TC Meeting,2006,Republic of Korea

(3,600KB) China Report: The New Advances of Agricultural Mechanization and Equipment Industry in Recent Year by WANG Maohua

Roundtable Forum for Regional Agricultural Machinery Manufacturers / Distributors Associations,2006,Republic of Korea Agricultural Machinery Industry in China (Paper, Presentation) by Prof. Gao Yuan¡¯en,Chairman,China Association of Agricultural Machinery Manufacturers
International Seminar on Enhancing Export Competitiveness of Asian Fruits 18-19 May 2006,Bangkok,Thailand

Fruit Production And Export Of China by DENG Xiuxin
(Paper , (6195kb)Presentation )

1st APCAEM GC/TC Meeting,2005,India

Promotion of Agricultural Mechanization in P.R.China by WANG Maohua

International Seminar on Biogas Technology for Poverty Reduction and Sustainable Development 18-20 October 2005,Beijing,China List of Participants
List of Papers
3rd APCAEM GB/TAC Meeting,2004,Vietnam

The New Advances of Agricultural Mechanization and Equipment Industry in Recent Year in P.R.China by WANG Maohua

International Seminar on ICT Applications for Agriculture and Rural Industry and Agro-Based Enterprise Development 5-7 April 2004 Beijing, China List of Presentations
International Seminar on Animal Feed and Biotechnology 24-25 March 2004 Beijing, China List of Presentations
2nd APCAEM GB/TAC Meeting, 2003,China

List of Participants

The Development of Agricultural Engineering & Mechanization in P. R. China by WANG Maohua

Analysis of Agricultural Policies in China and Other Countries by Professor Yan Ruizhen, Renmin University of China

1st APCAEM GB/TAC Meeting, 2002,China List of Participants

  Links to: UNESCAP(Bangkok)  APCICT(Incheon)  APCTT(New Delhi)  CAPSA(Bogor)  SIAP(Chiba)

Copyright© 2017 CSAM | Legal Notice  Email: info@un-csam.org