Sitemap
 
 

 

  

 
  Country Pages > India Presentations

Activities Participants Presentations / Papers
Regional Workshop for Research and Academic Institutions on: &Establishing a Cooperation Mechanism for Human Resource Development on Sustainable Agricultural Mechanization*, 13-15 April 2017, Nanjing, China Mr. Krishna Kumar Singh, Director, Central Institute of Agricultural Engineering (CIAE), Indian Council of Agricultural Research, Bhopal Cooperation Mechanism for HRD on Sustainable Agricultural Mechanization by Mr. Krishna Kumar Singh, Director, Central Institute of Agricultural Engineering (CIAE), Indian Council of Agricultural Research, India
Panel Discussion on Sustainable Agricultural Mechanization of CSAM, 17 March 2017, Bangkok, Thailand Mr. Surendra Singh, Technical Advisor, Agricultural Machinery Manufacturers* Association (AMMA-India), Punjab  
The twelfth session of the Governing Council (GC) of CSAM, 16 March 2017, Bangkok, Thailand Mr. Anil Singh, Embassy of India; 46 Soi 23 (Prasarnmitr), Sukhumvit Road, Bangkok 10110, Thailand  
3rd Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM), 8-10 December 2016, Negombo, Sri Lanka Dr. Kanchan Kumar Singh, Assistant Director General- Engineering, Indian Council of Agricultural Research (ICAR)   Presentation by outgoing Chair of ANTAM, India, representing participating member countries of ANTAM by Dr. Kanchan Kumar Singh, Assistant Director General- Agricultural Engineering, Indian Council of Agricultural Research (ICAR)
4th Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific, 23-25 November 2016, Bao Son Hotel, Hanoi Mr. Krishna Kumar Singh, Director, Central Institute of Agricultural Engineering (CIAE), Indian Council of Agricultural Research, Bhopal Climate-Smart Agriculture and Mechanization in India by Mr. Krishna Kumar Singh 
2nd Member Meeting of the Regional Council of Agricultural Machinery Associations in Asia and the Pacific (ReCAMA), 16-18 July 2016, Coimbatore, India Dr. Surendra Singh, Organizing Secretary, Indian Agricultural Machinery Manufacturers* Meet (AMMM 每 2016), Technical Adviser, India Agricultural Machinery Manufacturers' Association (AMMA-India), Pune
Mr. D S Balachandra Babu, President, India Agricultural Machinery Manufacturers' Association (AMMA-India)
Mr. Ashwani Kumar, Joint Secretary (M&T), Department of Agriculture Cooperation & Farmers Welfare (DOAC&FW), Ministry of Agriculture & Farmers Welfare
Dr. Gyanendra Singh, Former Vice Chancellor, Mahatma Gandhi Chitrakoot Gramoday University (MGCGV), Chitrakoot
Dr. Kanchan K Singh, Assistant Director General (Engineering), Indian Council of Agricultural Research (ICAR)
Dr. V M Mayande, Former Vice Chancellor, Dr. Panjabrao Deshmukh Krishi Vidyapeeth, Akola
Dr. N C Patel, Vice Chancellor, Anand Agricultural University, Anand
Dr. Jasmit Singh, Head, Agriculture, Federation of Indian Chambers of Commerce & Industry (FICCI)
Mr. T.R. Kesavan, TAFE Tractor Company, Chennai
Mr. K. Viswanathan Kumarasamy, President, AMMA-India (TN Chapter), Director 每 Greenfield Equipments Pvt. Ltd.
Mr. Rajkumar Arumugam, Secretary, AMMA-India (TN Chapter), Director 每 Renaaissance Power products Pvt Ltd.
Mr. Kamal Chinnasamy, Director, Gomathi Engineering
Mr. R. Shasi Kumar, Chairman, AGRI INTEX 2016

Asian and Pacific Workshop on Whole-Process Mechanization of Potato Production, 27-28 June 2016, Kunming, China Mr. Kanchan Kumar Singh, Assistant Director General (Engg.), Indian Council of Agricultural Research (ICAR), New Delhi

Mr. Champat Raj Mehta, Project Coordinator, AICRP on Farm Implements and Machinery, Central Institute of Agricultural Engineering, Indian Council of Agricultural Research (ICAR), Bhopal
The Whole-Process Mechanization of Potato Production in India
by Dr. Kanchan Kumar Singh, Assistant Director General (Engineering), Indian Council of Agricultural Research (ICAR)
2nd Meeting of the Technical Working Groups (TWGs) of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM), 10-13 May 2016, Bangkok, Thailand Dr. Chandrashekhar Lohi, Director, Central Farm Machinery Training and Testing Institute

Dr. Surendra Singh, Technical Advisor; All India Machinery Manufacturers'
Association(AMMA)
Testing and Certification in India by Dr. Surendra Singh, Agricultural Machinery Manufacturer*s Association (AMMA-India)
3rd Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific & 11th Session of the Technical Commission & 11th Session of the Governing Council of CSAM, 9-11 December 2015, Manila, the Philippines Mr. Krishna Kumar Singh, Director, Central Institute of Agricultural Engineering, Bhopal



Mr. Surendrakumar Allimuthu, Professor for Farm Machinery, Tamil Nadu Agricultural University, Coimbatore Tamil Nandu
Human Resource Development of Agricultural Mechanization in India: Policy and Status by Dr. Krishna Kumar Singh, Director, Central Institute of Agricultural Engineering

Country Paper by Mr. Surendrakumar Allimuthu, Professor (Farm Machinery), Tamil Nadu Agricultural University
2nd Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM),3-5 December 2015,New Delhi, India Mr. Ashwani Kumar, Joint Secretary, Mechanization & Technology Division,Department of Agriculture, Cooperation and Farmers Welfare, Ministry of
Agriculture and Farmers Welfare,

Dr. K. Alagusundaram, Deputy Director General (Agricultural Engineering), Division of Agricultural Engineering, Krishi Anusandhan Bhawan - II, New Delhi

Dr. Kanchan Kumar Singh, Assistant Director General (Engineering), Indian Council of Agricultural Research (ICAR)

Er. Arvind Meshram, Deputy Commissioner (M&T), DAC, Krishi Bhawan, New Delhi

Mr. Vijaykumar Kale, Additional Commissioner, Mechanization & Technology Division, Dept.of Agriculture & Cooperation, Ministry of Agriculture

Dr. Krishna Kumar Singh, Director, Central Institute of Agricultural Engineering, Nabibagh, Berasia Road, Bhopal

Mr. C.R. Lohi, Director, Central Farm Machinery Training & Testing Institute
 
1st Annual Member Meeting of Regional Council of Agricultural Machinery Associations in Asia and the Pacific of CSAM, 26-28 October 2015, Qingdao, China Mr. D. S. Balachandra Babu, President, India Agricultural Machinery Manufactures' Association, Pune
Mr. Balasaheb Dattaray Bhosale, President, SURYA Tractors Co.; Puna
Mr. Bhanudas Narayan Sonawane, Benson Agro. Engineering, Nashik
Mr. B. Vasantha Kumar, Kovai Classic Industries,
Mr. Chandramouli Sharma, Senior Vice President Marketing, V.S.T. Tillers Tractors Ltd., Bangalore,
Mr. Kamal Chinnasamy, Proprietor, Gomadhi Engineering Service, Tamilnadu
Mr. K. Shijithkumar, Kavungal Agro Tech (P) Ltd., Kerala
Mr. Sanjay Bhansali, Director, Bhansali Trailors Pvt Ltd., Ahmednagar
Mr. S. Sumesh, Varsha Associates, Chitradurga

 
Farm Mechanization in India by D.S.Balachandra Babu, President, Agricultural Machinery Manufacturers* Association (AMMA), India
Training and Study Tour for Agricultural Machinery Distributors in Asia and the Pacific, 27 July-4 August 2015, Beijing, China Mr. Kamal Chinnasamy, Proprietor, Gomadhi Engineering Service, Tamilnadu

Mr. Sanjay Dhanraj Bhansali, Director, Bhansali Trailors, Kopargaon

Mr. Dhaval Rameshbhai Tanti, Business Development Manager 每 Export, Khedut Agro Engineering Pvt. Ltd., Gujarat
 
1st Technical Working Group (TWG) Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM), 4-6 May 2015, Serpong, Indonesia Dr. Kamal Nayan Agrawal, Principal Scientist, Agricultural Mechanization Division, Central Institute of Agricultural Engineering, Nabi Bagh, Berasia Road, Bhopal, India  
The Tenth Session of the Technical Committee (TC) of CSAM & Regional Workshop on Establishing a Regional Database of Agricultural Mechanization in Asia and the Pacific, Siem Reap, Cambodia, 17-19 November 2014 Ms. Ismal Kumudini, Joint Secretary, Ministry of Agriculture, India
Mr. Arvind Natthu Meshram, Deputy Commissioner (Mechanization), Ministry of Agriculture, India
Mr. Surendra Singh, Technical Advisor, Agricultural Machinery Manufacturers* Association (AMMA-India)
Dr. Kanchan Kumar Singh, Assistant Director General (Engineering), Indian Council of Agricultural Research (ICAR)
Mr. Gajendra Singh, Adjunct Professor, Indian Agricultural Research Institute
Country Presentation Paper (PPT, Paper) by Dr. Kanchan K. Singh, Assistant Director General (Engineering), ICAR

 
Agricultural Machinery Manufacturer*s Association (AMMA-India) by Dr. Surendra Singh, AMMA

 National Data Requirement for a Regional Database of Agricultural Mechanization in Asia and the Pacific by Dr. Gajendra Singh, Indian Agricultural Research Institute
Regional Roundtable of National Agricultural Machinery Associations in Asia and the Pacific, 28-30 October 2014, Wuhan, China Dr. Surendra Singh, Technical Advisor, India Agricultural Machinery Manufacturers* Association (AMMA-India)

Mr. Baldev Singh, Chairman(Intl' Activities), India Agricultural Machinery Manufacturers Association (AMMA-India)

Mr. Balachandra Babu Duvoor Subramania Reddy, President, India Agricultural Machinery Manufactures' Association (AMMA-India)

Country Presentation by Dr. Surendra Singh, Technical Advisor, Agricultural Machinery Manufacturers* Association (AMMA-India), India
1st Annual Meeting of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM), 16-19 September 2014, Beijing, China
Ms. Ismal Kumudini, Joint Secretary, Ministry of Agriculture, India

Mr. Vijaykumar Kale, Additional Commissioner, Mechanization & Technology Division, Department of Agriculture & Cooperation, Ministry of Agriculture, India


Dr. Kanchan Kumar Singh, Assistant Director General (Engineering), Indian Council of Agricultural Research (ICAR)

Mr. Champat Raj Mehta, Project Coordinator, AICRP on Farm Implements and Machinery, Central Institute of Agricultural Engineering
India*s Agricultural Mechanization Strategies by Ms. Rani Kumudini, Joint Secretary of the Indian Ministry of Agriculture, India

Status on Testing of Agricultural Machinery in India by Mr. Kanchan K. Singh, Assistant Director General (Engg.) & Mr. C R Mehta, Project Coordinator, AICRP on Farm Implements and Machinery, Indian Council of Agricultural Research(ICAR), New Delhi, India
2nd Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific, 9-11 September 2014, Serpong, Indonesia  Dr. Kanchan Singh, Assistant Director General (Engineering), Indian Council of Agricultural Research (ICAR), New Delhi

Dr. Gajendra Singh, Adjunct Professor, Indian Agricultural Research Institute (IARI), New Delhi

Mr. Vikram Aditya Ahuja (PhD), Director, Zamindara Farmsolutions Pvt. Ltd., FAZILKA (Punjab)

Custom Hiring Of Agricultural Machinery In India  by Dr. Kanchan Singh, Assistant Director General (Engineering), Indian Council of Agricultural Research (ICAR), India

Pay for Use - for Affordable Farm Mechanization by Mr. Vikram Aditya Ahuja, Director, Zamindara Farmsolutions PVT. Ltd. India
High-Level Multi-Stakeholder Consultation on Sustainable Agricultural Mechanization in Asia and the Pacific, 26-27 June 2014, Bangkok, Thailand Dr. V.N. Kale, Additional Commissioner (M & T), DAC, Ministry of Agriculture and Food Processing Industries, New Delhi

Dr. A.N. Meshram, Deputy Commissioner (M & T), Ministry of Agriculture and Food Processing Industries, New Delhi

Dr. D.S. Balachandra Babu, President, Agricultural Machinery Manufacturers Association, Dhanori, Pune, India
 
9th Session of the Governing Council of CSAM, 19 November 2013, Bangkok, Thailand Mr. Kanchan K. Singh, Assistant Director General (Engineering), Indian Council of Agricultural Research  
The Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) is launched, 18 November 2013, Bangkok, Thailand Mr. Kanchan Singh, Assistant Director General (Engg.), Indian Council of Agricultural Research, New Delhi  
Regional Forum on Sustainable Agricultural Mechanization in Asia and the Pacific, 26-27 October 2013, Qingdao, China Mr. Champat Raj Mehta, Project Coordinator, AICRP on Farm Implements and Machinery, Central Institute of Agricultural Engineering, Bhopal (4,780kb) Presentation on India Agricultural Mechanization Strategies by Dr. Champat Raj Mehta, Project Coordinator, AICRP on Farm Implements and Machinery, Central Institute of Agricultural Engineering, India
(2,192kb) Agricultural Mechanization Strategies in India by Dr. Champat Raj Mehta
9th Session of the Technical Committee of CSAM, 17-18 October 2013, Bhopal, India

Mr. Pitam Chandra, Director, Central Institute of Agricultural Engineering, Bhopal

 

Mr. Champat Raj Mehta, Project Coordinator, AICRP on Farm Implements and Machinery, Central Institute of Agricultural Engineering, Bhopal


(14,323kb) Sustainable Agricultural Mechanization by C. R. Mehta, Project Coordinator, AICRP on FIM, Central Institute of Agricultural Engineering, Bhopal, Indian Council of Agricultural Research, New Delhi, India
4th ANTAM Meeting & 3rd SAMS meeting, 23-24 October 2012, Kandy, Sri Lanka Mr. Champat Raj Mehta
Mr. Harminder Singh Sidhu
 
Eighth Session of the Technical Committee of CSAM, 23-25 October 2012, Kandy, Sri Lanka Mr. Champat Raj Mehta, Head, Agricultural Mechanization Division, Central Institute of Agricultural
Engineering, Bhopal
Mr. Harminder Singh Sidhu, Senior Research Manager, CSISA Project Hub Punjab, Punjab Agricultural University Campus, Ludhiana
 
※ANTAM§ Technical working Group & Steering Committee Meeting on advancing progress with establishing an Asia-Pacific network for testing agricultural machinery, 15-16 May 2012, Bangkok, Thailand Dr. Mahan Mohan Pandey, Deputy Director General (Engineering)ㄛ408, KAB - II, Pusa Campus, New Delhi - 110012 (230kb) Research Report
Sustainable Agricultural Mechanization Roundtable: Moving Forward on the Sustainable Intensification of Agriculture, 8-9 December 2011 Dr. Neelima Jerath, Executive Director
Dr. Gurharminder Singh, Senior Scientific Officer
Punjab State Council for Science and Technology, Department of Science, Technology and Environment, Government of Punjab, MGSIPA Complex, Sector-26, Chandigarh

Dr. Harminder Singh Sidhu, Sr. Research Manager
CSISA Project Hub Punjab, Teri House, Punjab Agricultural University Campus, Ludhiana-141004

(2,719kb) Farm Mechanization in Punjab: Social, Economic and Environmental Implications by Gurharminder Singh, Sr. Scientific Officer,Punjab State Council for Science & Technology, India

(13,540kb) India, Conservation Agriculture and Agricultural Mechanization Strategies - Cross fertilization of ideas by H S Sidhu (Sr. Research Manager), Cereal Systems Initiative for South Asia (CSISA) Project, Punjab Hub

(6,283kb) Intensive Agriculture in Punjab: An Environmental Appraisal by Dr. Neelima Jerath, Executive Director, Punjab State Council for
Science & Technology, India

7th Governing Council meeting of UNAPCAEM, 6 December 2011, Bangkok, Thailand Mr. Madan Mohan Pandey, Deputy Director-General, Central Institute of Agricultural Engineering, Indian Council of Agricultural Research (ICAR), Krishi Anusandhan Bhawan-II, Pusa, New Delhi  
7th Technical Committee of UNAPCAEM, 27-28 October 2011, Bali, Indonesia N/A  
Expert Group Meeting (EGM): Development of a sustainable agricultural machinery and farm implements testing network in the Asia-Pacific region, 26 July 2011, Bangkok, Thailand Mr. Vijaykumar Kale, Director, Central Farm Machinery Training & Testing Institute, Dept. of Agriculture & Cooperation, Min. of Agriculture, Govt. of India
Testing of Farm Machinery in India and the role of ANTAM by Dr. Madan Mohan Pandey, Deputy Director General (Engg.), Indian Council of Agricultural Research, New Delhi, India
The Sixth Session of the Governing Council of UNAPCAEM, 10 February 2011, Bangkok, Thailand Dr. Madan Mohan Pandey, Deputy Director-General, Central Institute of Agricultural Engineering, Indian Council of Agricultural Research (ICAR), Krishi Anusandhan Bhawan-II, Pusa, New Delhi  
6th APCAEM TC Meeting & Strategic Planning Workshop,Putrajaya, Malaysia, 29 November-2 December 2010 Mr. Netra Pal Singh Sirohi, Assistant Director General (Engineering), Indian Council of Agricultural Research,
405, Krishi Anusandhan Bhawan-II, Pusa, New Delhi, India
 
The Fifth Session of the Governing Council of UNAPCAEM,14-15 December 2009, Bangkok, Thailand

Dr. Suresh Kumar Tandon, Assistant Director-General (Engineering), Indian Council of Agricultural Research (ICAR), New Delhi

 
5th APCAEM TC Meeting & Expert Group Meeting on Application of Agricultural Machinery for Sustainable Agriculture, the Philippines, 14-16 October 2009 Dr. SD Kulkarni
Director
Central Institute of Agricultural Engineering
Indian Council of Agricultural Research (ICAR)
Krishi Anusandhan Bhawan-II, Pusa Complex,
New Delhi- 110 012, India
Mechanization of Agriculture - Indian Scenario
4th APCAEM GC/TC Meeting, Chiang Rai, Thailand,10-12 February 2009 Dr. Madan Mohan Pandey
Director, Central Institute of Agricultural Engineering, Indian Council of Agricultural Research (ICAR), Krishi Anusandhan Bhawan-II, Pusa Complex, New Delhi, 110 012, India
Country Report ( Indian Agriculture-an Introduction) by MM Pandey,Director, Central Institute of Agricultural Engineering, Bhopal, India
(391kb)Paper, (12,643kb)Presentation
Regional Forum on Bioenergy Sector Development: Challenges, Opportunities, and the Way Forward, 23-25 January 2008,Bangkok, Thailand Mr. Anandajit Goswami, Associate Fellow, The Energy and Resources Institute (TERI)
Mr. Varghese Paul Kottayil, Associate Fellow, The Energy and Resources Institute (TERI)

Biodiesel Transesterification Plants in India: Overview
India's Biodiesel Programme: Promises and Challenges

3rd APCAEM GC/TC Meeting,2007, China Dr. Nawab Ali (CV)
Deputy Director-General (Engineering)
Indian Council of Agricultural Research (ICAR), New Delhi, India
Engineering Interventions for Higher and Sustainable Agricultural Growth in India
(Paper, (1,998kb)Presentation)
International Seminar on Enhancing the Extension of Conservation Agriculture Techniques in Asia and the Pacific, Zhengzhou, Henan, China, 24-26 October 2007 Dr. S. K. Tandon(CV) Conservation Agriculture Policy 每 Perspective and Future Scope (Keynote Presentation IV - 1)
(3911kb)PPT1, (2043kb)PPT2
(268kb)PPT3, (186kb)PPT4
(490kb)PPT5, (249kb)PPT6
(231kb)PPT7, (256kb)PPT8, (44kb)PPT9
International Seminar on Restructuring and Strengthening Research and Development (R&D) for Agricultural Engineering,27-28 April 2007, Beijing,China Dr. Nawab Ali Agricultural Engineering Research and Development in India
2nd APCAEM GC/TC Meeting,2006,Republic of Korea

Dr. M.M. Pandey

Roundtable Forum for Regional Agricultural Machinery Manufacturers / Distributors Associations,2006,Republic of Korea   Tractor Industry in India 每 Present and Future(Paper, Presentation) by Ramesh C. Jain,President,Indian Tractor Manufacturer's Association
International Seminar on Enhancing Export Competitiveness of Asian Fruits 18-19 May 2006,Bangkok,Thailand

Dr. Pitam Chandra

Issues and Solutions of Fresh Fruit Export in India by Pitam Chandra and Abhijit Kar

Issues and Solutions of Fresh Fruits Export in India

Role of Terminal Market in Fresh Fruit Export

1st APCAEM GC/TC Meeting,2005,India

Dr. S. D. Kulkarni, Director, Central Institute of Agricultural Engineering (CIAE), Nabi Bagh, Bersia Road, Bhopal 462038, India

Dr. S. K. Tandon, Assistant Director General (Engineering), Indian Council of Agricultural Research(ICAR), Krishi Anusandhan Bhawan-II, Pusa Complex, New Delhi

India agricultural mechanization 每 present scenario and perspective

 

International Seminar on Biogas Technology for Poverty Reduction and Sustainable Development 18-20 October 2005,Beijing,China

Mr. Nema Badri Prasad ,Indian Council of Agricultural Research, KAB-II, Dr KS Krishnan Marg, New Delhi,110012

Mr. Pawan Kumar Jha ,Sulabh International Academy of Environmental Sanitationㄛ Sulabh Bhawan, Mahavir Enclave, Palam Dabri Road, New Delhi 110045, India

Mr. Gharpure Vasudeo Waman

Ms. Sinha Susmita

Biogas technology for poverty reduction and sustainable development

Recycling and reuse of human excreta from public toilets through biogas generation to improve sanitation, community health and environment

Recycling and reuse of human excreta from public toilets through biogas generation to improve sanitation, community health and environment

Biogas Manure (BgM) use as a viable input in sustainable agriculture 每 an integrated approach

Biogas Manure (BgM) use as a viable input in sustainable agriculture 每 an integrated approach

DEWATS linked Biogas

Biogas and DEWATS, a perfect match?

3rd APCAEM GB/TAC Meeting,2004,Vietnam

Dr. S. K. Tandon

Country Report

Weeding and Interculture Equipment
International Seminar on ICT Applications for Agriculture and Rural Industry and Agro-Based Enterprise Development 5-7 April 2004 Beijing, China Er. Birendra Kumar Garg ,Principal Scientist,Central Institute of Agricultural Engineering Information Technology in Agriculture
International Seminar on Animal Feed and Biotechnology 24-25 March 2004 Beijing, China D. S. Uppal, S. M. Ilyas , S. S. Sikka Quality and Safety of Animal Feed in India

Quality and Safety of Animal Feed in India
2nd APCAEM GB/TAC Meeting, 2003,China

Dr. Pitam Chandra

Country Report
1st APCAEM GB/TAC Meeting, 2002,China

Anwar Alam

 

 

  Links to: UNESCAP(Bangkok)  APCICT(Incheon)  APCTT(New Delhi)  CAPSA(Bogor)  SIAP(Chiba)

Copyright© 2017 CSAM | Legal Notice  Email: info@un-csam.org